Place the cherry picker under the tree so you can climb safely and still reach out to cut the branches. Make sure the cherry picker is on solid ground, with the area as level as possible. The first part of cutting down a large tree involves using a cherry picker to climb up the trunk and remove all the branches with a small chain saw. Experts recommend hiring a certified arborist to remove a tree 8 inches or more in diameter around the trunk.
If there are no arbalists in your area, find a forester or an accredited tree service to safely remove the tree. Your local garden center, tree nursery, or university extension service can offer guidance and recommendations. According to the International Arboriculture Society, you should be wary of people who go door to door and offer bargains for working on trees. Most reputable companies are too busy to apply for work that way.
Make a diagonal cut at an angle of 45 degrees above or below the initial cut, removing a piece of wood from one side of the tree. You may be allowed to remove a tree from your land, but you cannot do the same when it is publicly owned. If you don't have the right tools and experience, it's better and safer to go to a professional arborist to remove the tree. In addition, be sure to follow the above-mentioned steps correctly to successfully and safely remove a tree and avoid any possible damage or accident.
For more advanced work, hire a certified arborist like Tree Lopping Townsville Services to help you with the diagnosis and confirm if the tree can be saved or should be removed. Removing large, dead trees may seem easy, but it's difficult because a large, dead tree has loose branches that can cause an accident when it falls. You'll measure the total length of the tree because that's how you can guess where the tree will fall. In addition, if the tree has brown leaves, it indicates that it is being killed by insects, diseases, or water stress.
You can buy some time before you face the need to remove the entire tree by pruning sick or dead branches. Safely removing a large tree is always the job of a professional, but here's how to decide if you're ready to hire one and what to consider when selecting one for the job. Before we get into that, let's take a look at how you can tell it's time to finally remove a tree. Unfortunately, sometimes even healthy trees must be removed if they are huddled or shading other, more desirable plants, or if they are too close to power lines and utilities, or to a sidewalk.
The time depends on the size of the tree you are going to cut, but it takes several hours to cut down a tree. A tree can withstand a total loss of 5 to 20%, which means that 5 to 20% of the total tree can be cut without killing it.
Townsville Tree Lopping Services
30 Sunderland St
Garbutt QLD 4814
(07) 4243 4100